Ask a workshop what bulb a car takes and you will get a socket code, not a wattage: H7, H11, H4, 9005. Ask a distributor to place a first order and the same four codes come back, usually together, because one market rarely runs on a single fitment. This chart is the short version we send buyers before they build a mixed order.
The important part is not memorising the codes. It is knowing that H4 and H7 are not related, that H8 / H9 / H11 share a base but not a wattage, and that a high-beam 9005 is almost always ordered with a low-beam 9006. Get those three things right and most fitment complaints disappear.
The Quick Chart
| Socket | Also called | Base | Beam and typical position |
|---|---|---|---|
| H4 | 9003 / HB2 | P43t | Dual (high + low) · older cars, motorcycles, pickups, 7-inch round |
| H7 | H7LL | PX26d | Single · European and Korean low beam |
| H11 | H8 / H9 (related base) | PGJ19-2 | Single · Japanese / Korean low beam and fog |
| 9005 | HB3 | P20d | Single · high beam, often paired with 9006 |

Dual Beam vs Single Beam: Why H4 Is the Odd One Out
A halogen H4 has two filaments in one glass envelope, so one bulb produces both high and low beam. The LED replacement has to reproduce two light sources plus a shield that creates the low-beam cutoff. That is why H4 bulbs are more sensitive to chip placement, and why a badly made H4 can look impressive on a garage wall while throwing glare into oncoming traffic.
H7, H11 and 9005 are single-filament. The reflector or projector does all the beam shaping, and a vehicle fitted with separate low and high beam positions will need two pairs of bulbs. When a buyer says "one kit per car", ask whether the car uses a dual-beam H4 or two single-beam sockets — the carton count changes.
How to Confirm a Fitment Before a Bulk Order
- Read the marking on the old bulb. The code is usually stamped on the metal collar or the glass, not on the plastic connector.
- Check the owner's manual or the headlamp housing itself — many housings are embossed with the socket code.
- Note the model year and trim. The same nameplate can switch from H4 to H11 across a generation, and a facelift can change the low beam only.
- For H8 / H9 / H11, verify the housing marking rather than assuming interchangeability. The bases are related but keyed and rated differently.
- Check the base code, body dimensions and decoder option on the product page for the exact model you are quoting. It is faster than resolving a return shipment.
H4 and H7 are not interchangeable. Neither is 9005 and H11. Bases, pin counts and keying all differ. Mixed-socket cartons are fine — mixed assumptions are what cause containers of unsellable stock.
Building a First Order Across Several Sockets
Most distributors start with a trial carton covering the sockets that dominate their market: H11 + 9005 for Japanese sedans and pickups, H7 for European and Korean platforms, H4 for older fleets, motorcycles and GCC pickups. Confirm the current MOQ, lead time and private-label options with our team when you request the quote — see our OEM/ODM page and private-label page.
If the vehicle list includes modern CANbus-monitored cars, flag it at quotation stage so the decoder-equipped version is quoted from the start. Our CANbus guide explains the failure mode, and the DOT vs ECE guide covers the documentation different markets ask for. Browse the full headlight category for the complete series list.
Can I use an H11 bulb in an H4 housing?
No. H4 uses a P43t base with three terminals and handles both beams; H11 uses a PGJ19-2 twist-lock base with a single beam. They are physically and electrically different. Use the H4 range or the H11 range according to the housing marking.
Why do H8, H9 and H11 appear together?
They belong to the same PGJ19 base family, so buyers search them as a group. Their ratings differ — H8 is 35 W, H11 55 W, H9 65 W — and the connector tabs are keyed differently. We group them on the H11 page, but the housing still decides which one fits.
Which sockets should a new distributor stock first?
It depends on the vehicle parc in your market. As a rule of thumb: H11 and 9005 for Japanese / American sedans and pickups, H7 for European and Korean cars, H4 for older fleets, motorcycles and GCC pickups. Send us your vehicle list and we will propose the mix before you commit.
Do you supply mixed-socket cartons with private-label packaging?
Yes. Mixed cartons are standard for trial orders, and the same packaging artwork can be used across every socket in the order. See private label for the process.
Shop LED headlight bulbs by size
Wholesale buyers order by socket, not by series code. Pick a base to see the Chedina models listed for it, with specs and a quote path — and confirm the exact base before ordering.
Related reading
Short answers to the questions buyers ask us most.
