Loading...
Loading...
Find answers to common questions about our products, ordering, and services.
Still have questions? Our team is ready to help.
Contact UsH1 is one of the oldest and most widespread single-filament sockets in the aftermarket. Its P14.5s base carries one filament that does one job — low beam, high beam or fog, depending on the vehicle — which is why H1 cars always carry the bulb in pairs. It remains standard fitment across older European platforms, Japanese compacts and countless fog-lamp housings in Latin America, the Middle East and Africa.
33 of our 43 headlight models across five series — C, L, T, F and U — can be supplied with an H1 base. A single series is often offered with several socket bases, so confirm the exact base you need before ordering. Choose by lumen output, cooling design and housing depth, then tell us the target market and packaging.
H1 is one of the oldest and most widespread single-filament sockets in the aftermarket. Its P14.5s base carries one filament that does one job — low beam, high beam or fog, depending on the vehicle — which is why H1 cars always carry the bulb in pairs. It remains standard fitment across older European platforms, Japanese compacts and countless fog-lamp housings in Latin America, the Middle East and Africa.
33 of our 43 headlight models across five series — C, L, T, F and U — can be supplied with an H1 base. A single series is often offered with several socket bases, so confirm the exact base you need before ordering. Choose by lumen output, cooling design and housing depth, then tell us the target market and packaging.
Listed from our catalogue. One series can be supplied with several socket bases — confirm the exact base you need before ordering. OEM/ODM and private-label options are on our wholesale pages.
Building a full vehicle kit? Check the other socket pages.
| Socket | H1 |
|---|---|
| Also known as | 448 / H1ST |
| Base | P14.5s |
| Beam | Single beam |
| Typical position | Low beam, high beam or fog — one job per bulb |
| Halogen draw | 55 W |
A halogen H1 draws about 55 W from a single axial filament held by a P14.5s base. An LED replacement must place its chip exactly where that filament sat, or the reflector loses its focal point and the beam turns into glare. Because H1 housings are often small and partly sealed, body diameter and heat-sink height decide whether an LED bulb actually fits — measure the housing before quoting a fleet order.
H1 lamps are usually compact, so a slim fanless body with a flexible copper braid fits where larger heat sinks do not. For CANbus-sensitive vehicles pick a decoder-equipped series. Our C / L / T / F / U series cover compact, high-output and CANbus-ready builds — check body dimensions, cooling type and decoder option on the product page before quoting.
No. Both are single-filament sockets, but H1 uses a P14.5s flanged base while H3 uses a PK22s base with a separate wiring pigtail. They are not interchangeable — always match the base stamped on the original bulb.
On vehicles that monitor bulb load, yes. The CANbus expects a 55 W halogen draw and may flag a 20–30 W LED as a failure, causing a warning light or flicker. Choose a series with built-in decoding or add an external decoder; tell us your vehicle mix and we will specify the right version.
Yes. Mixed-socket cartons are common for a first order. Send us the sockets, models and quantities and we will confirm the current MOQ, lead time and private-label options.
Tell us the sockets, target vehicles and quantity. We will send the series match, MOQ and lead time.
Request a quote