Loading...
Loading...
Find answers to common questions about our products, ordering, and services.
Still have questions? Our team is ready to help.
Contact Us9005, also called HB3, is a 60 W single-filament bulb on a P20d base and the most common high-beam socket on Japanese and American pickups and SUVs. It is usually bought together with 9006 (HB4) for the low beam, which is why distributors quote both in one order.
For a high beam, the job is distance and a controlled hot spot rather than a wide cutoff. That changes which series we recommend. The models below can be supplied with a 9005 base. One series may cover several sockets, so confirm the base before ordering; send us the vehicle mix and we will match output, heat sink and decoding.
9005, also called HB3, is a 60 W single-filament bulb on a P20d base and the most common high-beam socket on Japanese and American pickups and SUVs. It is usually bought together with 9006 (HB4) for the low beam, which is why distributors quote both in one order.
For a high beam, the job is distance and a controlled hot spot rather than a wide cutoff. That changes which series we recommend. The models below can be supplied with a 9005 base. One series may cover several sockets, so confirm the base before ordering; send us the vehicle mix and we will match output, heat sink and decoding.
Listed from our catalogue. One series can be supplied with several socket bases — confirm the exact base you need before ordering. OEM/ODM and private-label options are on our wholesale pages.
Building a full vehicle kit? Check the other socket pages.
| Socket | 9005 |
|---|---|
| Also known as | HB3 / 9005XS |
| Base | P20d |
| Beam | Single beam |
| Typical position | High beam; commonly paired with 9006 (HB4) |
| Halogen draw | 60 W |
The P20d base is a right-angle plastic connector with a keyed tab and an O-ring. A halogen 9005 draws about 60 W; H10 and 9040 look similar but are keyed differently. Because high beams run intermittently, thermal design is less constrained than on a low beam, but the driver still has to handle the voltage spikes common on PWM-controlled DRL circuits.
Match the beam shape first: a high beam wants a focused centre, not a wide flood. Then check whether the vehicle uses PWM for daytime running lights — that is what causes flicker and needs a decoder-equipped series. If you are building a full kit, quote 9005 together with 9006 so the pair ships in one carton.
Yes — 9005 is the trade number and HB3 the US regulatory designation. Both use the P20d base. Do not confuse it with 9006 / HB4, which is a different keying used mostly for low beam.
No. They use different bases (P20d vs PGJ19-2) and are not interchangeable. Some multi-fit kits use swappable collars, but those are series-specific — ask us which of our series supports them.
Many trucks pulse the high beam at low duty cycle for daytime running lights (PWM). An LED reacts instantly to each pulse, so it appears to flicker. A decoder-equipped series or an anti-flicker harness solves it.
Tell us the sockets, target vehicles and quantity. We will send the series match, MOQ and lead time.
Request a quote