Loading...
Loading...
Find answers to common questions about our products, ordering, and services.
Still have questions? Our team is ready to help.
Contact UsH8 is the 35 W member of the PGJ19 (H11) bulb family, used mainly for front fog lamps and, on some models, daytime running lights. It shares the wire-terminal collar design with H11 and H16 — the three differ in wattage and rating, not in shape — which is why H8 LEDs are usually stocked next to H11.
33 of our 43 headlight models across five series — C, L, T, F and U — can be supplied with an H8 base. A single series is often offered with several socket bases, so confirm the exact base you need before ordering. Choose by lumen output, cooling design and housing depth, then tell us the target market and packaging.
H8 is the 35 W member of the PGJ19 (H11) bulb family, used mainly for front fog lamps and, on some models, daytime running lights. It shares the wire-terminal collar design with H11 and H16 — the three differ in wattage and rating, not in shape — which is why H8 LEDs are usually stocked next to H11.
33 of our 43 headlight models across five series — C, L, T, F and U — can be supplied with an H8 base. A single series is often offered with several socket bases, so confirm the exact base you need before ordering. Choose by lumen output, cooling design and housing depth, then tell us the target market and packaging.
Listed from our catalogue. One series can be supplied with several socket bases — confirm the exact base you need before ordering. OEM/ODM and private-label options are on our wholesale pages.
Building a full vehicle kit? Check the other socket pages.
| Socket | H8 |
|---|---|
| Also known as | H8LL / HI8 |
| Base | PGJ19-1 |
| Beam | Single beam |
| Typical position | Front fog lamp (DRL on some models) |
| Halogen draw | 35 W |
A halogen H8 draws 35 W through a single filament held by a PGJ19-1 collar with detachable wire terminals. The socket is rated for a lower thermal load than H11, so when converting to LED pick a bulb with controlled output and efficient heat dissipation — pushing too much power into a fog housing overheats the connector, not just the bulb.
Fog housings are small and often sealed, so a compact body with a slim heat sink or flexible braid fits best. Keep output in fog-lamp territory — controlled beam, not maximum lumens. Our C / L / T / F / U series include fog-rated builds; check body dimensions, cooling type and connector kit on the product page before quoting.
They all use the PGJ19 collar family and share the same shape, but differ in wattage and electrical rating — H8 35 W, H9 65 W, H11 55 W, H16 19 W. Match the rating printed on the original bulb before swapping.
It may fit physically, but an H11-rated bulb draws more power than the H8 socket and wiring are rated for and can overheat the connector. Use an LED specified for H8 — our series carry the correct rating for each socket.
Some vehicles monitor the fog-lamp circuit and may flicker or warn on a low-draw LED. Decoder-equipped versions are available across our series; tell us the vehicle mix in your market and we will specify the right version.
Tell us the sockets, target vehicles and quantity. We will send the series match, MOQ and lead time.
Request a quote