Loading...
Loading...
Find answers to common questions about our products, ordering, and services.
Still have questions? Our team is ready to help.
Contact UsH4 is the dual-beam workhorse of the aftermarket. Also stamped 9003 or HB2 depending on the market, it runs both high and low beam from a single P43t base — which is why it is still the first socket buyers ask for on older passenger cars, motorcycles, 7-inch round headlights and the pickup fleets across Latin America and the GCC.
Our 43 headlight models span five series — C, L, T, F and U — and the models below can be supplied with an H4 base. A single series is often offered with several socket bases, so confirm the exact base you need before ordering. Choose by lumen output, cooling design and housing depth, then tell us the target market and packaging.
H4 is the dual-beam workhorse of the aftermarket. Also stamped 9003 or HB2 depending on the market, it runs both high and low beam from a single P43t base — which is why it is still the first socket buyers ask for on older passenger cars, motorcycles, 7-inch round headlights and the pickup fleets across Latin America and the GCC.
Our 43 headlight models span five series — C, L, T, F and U — and the models below can be supplied with an H4 base. A single series is often offered with several socket bases, so confirm the exact base you need before ordering. Choose by lumen output, cooling design and housing depth, then tell us the target market and packaging.
Listed from our catalogue. One series can be supplied with several socket bases — confirm the exact base you need before ordering. OEM/ODM and private-label options are on our wholesale pages.
Building a full vehicle kit? Check the other socket pages.
| Socket | H4 |
|---|---|
| Also known as | 9003 / HB2 / H19 |
| Base | P43t |
| Beam | Dual beam |
| Typical position | High + low beam in one bulb |
| Halogen draw | 55 / 60 W |
A halogen H4 draws roughly 55 W on low beam and 60 W on high beam and uses two filaments inside one glass envelope. An LED replacement has to put its chips in exactly the same two positions, with a shield that recreates the low-beam cutoff. If the chips sit a millimetre off, the reflector throws glare instead of a beam — that is the single most common reason a cheap H4 LED looks bright on a wall but useless on the road.
Start with the housing, not the lumen number. Shallow or sealed housings need a compact fanless body; open reflectors can take a larger heat sink and higher output. Sensitive CANbus vehicles should use a decoder-equipped series. Our C / L / T / F / U series cover all three cases — check the body dimensions, cooling type and decoder option on the product page before quoting.
Yes for fitment purposes. H4 is the European designation, 9003 the North American one and HB2 the US regulatory code. They share the P43t base and the same dual-filament layout. Always confirm the vehicle's owner manual before a bulk order, because H19 and some HS1 variants look similar but are not drop-in identical.
On some vehicles, yes. The CANbus system expects the 55/60 W halogen draw and reads a 20–30 W LED as a failed bulb, causing a warning light or flicker. Choose a series with built-in decoding, or add an external decoder. Tell us the vehicle mix in your market and we will specify the right version.
Yes. Mixed-socket cartons are common for a first order. Send us the sockets, models and quantities and we will confirm the current MOQ, lead time and private-label options.
Tell us the sockets, target vehicles and quantity. We will send the series match, MOQ and lead time.
Request a quote