Loading...
Loading...
Find answers to common questions about our products, ordering, and services.
Still have questions? Our team is ready to help.
Contact UsH7 is a single-filament 55 W bulb on a PX26d base. One bulb does one job — low beam or high beam — so a vehicle fitted with H7 usually needs two pairs. It dominates European and Korean platforms and is the socket most often quoted for VW, Golf, Jetta, Hyundai and Kia fitments.
Because the PX26d collar leaves little room behind the housing, H7 is where the mechanical details matter: adapter ring, dust cap clearance and driver size decide whether a bulb actually fits. The models below can be supplied with an H7 base. One series may cover several sockets, so confirm the base against your vehicle list before ordering.
H7 is a single-filament 55 W bulb on a PX26d base. One bulb does one job — low beam or high beam — so a vehicle fitted with H7 usually needs two pairs. It dominates European and Korean platforms and is the socket most often quoted for VW, Golf, Jetta, Hyundai and Kia fitments.
Because the PX26d collar leaves little room behind the housing, H7 is where the mechanical details matter: adapter ring, dust cap clearance and driver size decide whether a bulb actually fits. The models below can be supplied with an H7 base. One series may cover several sockets, so confirm the base against your vehicle list before ordering.
Listed from our catalogue. One series can be supplied with several socket bases — confirm the exact base you need before ordering. OEM/ODM and private-label options are on our wholesale pages.
Building a full vehicle kit? Check the other socket pages.
| Socket | H7 |
|---|---|
| Also known as | H7LL / 477 |
| Base | PX26d |
| Beam | Single beam |
| Typical position | Single beam — low beam or high beam |
| Halogen draw | 55 W |
A halogen H7 has one filament and no shield, so the reflector or projector defines the beam pattern entirely. An LED replacement must place its chips where that filament was and stay rotatable for clocking. The PX26d base uses a two-pin connector held by a spring clip or adapter ring — aftermarket LEDs often ship with a removable collar for exactly this reason.
Ask three questions before quoting: is there room behind the dust cap, does the housing need a specific adapter ring, and is the vehicle CANbus-monitored? Compact fanless series solve the first, removable collars the second, decoder-equipped series the third. Check the base, body dimensions and decoder option on each product page before quoting.
No. H4 is a dual-beam bulb with a P43t base and three terminals; H7 is single-beam on a PX26d base with two pins. They are not interchangeable. Confusing them is the most common ordering error in mixed-socket shipments.
Many factory headlamp housings hold the halogen bulb with a vehicle-specific retaining ring. LED bodies use a different collar, so a removable or model-specific ring is needed to lock the bulb in place and keep the beam aligned. We supply the ring with the series when required.
Yes. Distributors typically start with a mixed carton of H7, H4 and H11 to test their market. Private-label packaging can be applied to the whole trial order.
Tell us the sockets, target vehicles and quantity. We will send the series match, MOQ and lead time.
Request a quote