Short answer: 9005 (HB3) and 9006 (HB4) are not interchangeable. They belong to the same 9000-series bayonet family and look almost identical, but the base keyway, wattage and beam role are different. 9005 is the high-beam / fog-light bulb (about 65 W); 9006 is the low-beam / fog-light bulb (about 55 W). The socket your headlamp was built for decides the fit, and Chedina manufactures error-free LED versions of both. See the size chart and the 9005 fitment page for the exact models.
At a Glance
| Socket | Base | Beam | Typical use |
|---|---|---|---|
| 9005 / HB3 | P20d | High beam + fog | North American high beams, daytime running lights, fog lamps |
| 9006 / HB4 | P22d | Low beam + fog | North American low beams and fog lamps; often paired with 9005 high beam |
| Specification | 9005 / HB3 | 9006 / HB4 |
|---|---|---|
| Base | P20d | P22d |
| Halogen rating | 12 V · 65 W | 12 V · 55 W |
| Typical halogen output | ~1,700 lm | ~1,000 lm |
| Beam role | High beam, DRL, fog | Low beam, fog |
| Common pairing | High beam with a 9006 low beam | Low beam with a 9005 high beam |
| Chedina LED range | 9005 models | 9006 models |
The wattage gap is the practical reason the two are not interchangeable: a 9005 halogen is a 65 W high-beam lamp, a 9006 is a 55 W low-beam lamp, and the housing wiring, reflector and beam pattern were designed around that draw. Switching to LED cuts input power sharply, but the base and the beam role stay exactly the same — so you still order the socket the housing was built for, then choose the lumen rating you want.
Why the Bases Differ
Both bulbs use a two-pin bayonet base, but the keyway that locks them into the socket is cut differently — 9005 uses P20d, 9006 uses P22d. The pins are also spaced differently, so a 9005 will not seat correctly in a 9006 socket and vice versa. Beyond the base, the wattage differs: 9005 runs hotter and brighter as a high beam, while 9006 is tuned for low-beam duty. Swapping them changes the beam pattern and can over-drive a socket not designed for the higher wattage.
Do not file or grind the keyway to force a 9005 into a 9006 socket (or the reverse). A forced bulb makes poor contact, overheats, can throw CANbus errors, and ruins the beam aim. Replace like-for-like.
Can You Use a 9005 Where a 9006 Goes?
Only if the kit is explicitly designed for it. Some dual-beam LED and HID retrofit kits ship both bases so one bulb body fits either socket, but the bulb itself must be wired for the correct beam. A bare 9005 will not legally or physically substitute for a 9006. If you are unsure which your car takes, check the code stamped on the old bulb or follow the size chart.
Upgrading to LED and CANbus
Because LED draws far less current than halogen, some vehicles flag a bulb-out warning after an upgrade. If your car monitors the circuit (most North American vehicles built after ~2005), choose an error-free, decoder-equipped LED. Our CANbus guide explains the failure mode and the fix, and our DOT vs ECE guide covers the paperwork different markets ask for. Browse the full headlight range to match the exact socket.
Chedina LED Models Available in 9005 and 9006
One Chedina series can be supplied with several socket bases, so the series name alone does not fix the fit — the base is specified when you order. These high-output series are listed on our 9005 models and 9006 models pages; open any product page for its full spec sheet, lumen rating and quote path.
Buying for a fleet or a distributor mix? Send us the vehicle list and we will confirm every base before production — see our OEM/ODM page. Published output figures vary by configuration, so check the individual product page before specifying.
How to Confirm Which Socket Your Car Uses
- Read the code stamped on the original bulb — 9005 / HB3 or 9006 / HB4 is printed on the base or the glass.
- Check the owner's manual or the replacement-bulb chart for your model year; high and low beams are frequently different sockets on the same car.
- Note whether the car uses projectors or a bulb-out warning system — you may need a CANbus error-free LED with a decoder.
- Match that code to the 9005 fitment page or the 9006 fitment page, then pick the series and output you need.
Socket Aliases: HB3, HB4, P20d, P22d and the H11 Family
HB3 is the same bulb as 9005, and HB4 is the same bulb as 9006 — two names, one part, not two interchangeable parts. Confusing the naming with compatibility is the most common ordering mistake. HB3/HB4 are the trade names; 9005/9006 are the US part numbers; P20d/P22d are the base codes stamped in the metal. H8, H9 and H11 belong to a different PGJ19 base family entirely. Check the full bulb size chart or the H8/H9/H11 comparison before you quote a mixed order, and see which cars use 9006 for fitment examples.
| Name on the box | Base code | Nominal wattage | Usual beam | Swaps with 9005? |
|---|---|---|---|---|
| 9005 / HB3 | P20d | 65 W | High beam, fog, DRL | This is 9005 |
| 9006 / HB4 | P22d | 55 W | Low beam, fog | No — different keyway and wattage |
| H11 | PGJ19-2 | 55 W | Low beam, fog | No — different base family |
| H9 | PGJ19-5 | 65 W | High beam | No — different keyway |
| H8 | PGJ19-1 | 35 W | Fog, some low beams | No — lower wattage, different keyway |
Are 9005 and 9006 the same bulb?
No. They share the 9000-series bayonet family and look alike, but 9005 (P20d) is the high-beam/fog bulb and 9006 (P22d) is the low-beam/fog bulb, with different keyways and wattage. See the 9005 page and the size chart.
Can I put a 9005 in a 9006 socket?
Not as a direct swap. The keyway and pin spacing differ, so it will not seat correctly and the beam aim and wattage will be wrong. Use a kit that explicitly supports both bases, or fit the correct bulb.
Which should a distributor stock first?
It tracks the North American parc: 9005 high beams and 9006 low beams are both high-volume, and many trucks pair them. Send us your vehicle list and we will propose the mix — see our OEM/ODM page.
Is 9005 the same as H11?
No. H11 uses a different bayonet base (PGJ19-2) and is fitted mostly to low beams and fog lamps on Asian and newer vehicles; 9005 is P20d. They are not cross-compatible — see the bulb size chart for the full base list.
Which vehicles commonly use 9005 and 9006?
Both are widespread across North American sedans, SUVs and pickups, and are very often fitted as a pair: 9005 for high beam, 9006 for low beam on the same vehicle. Always confirm against the original bulb or the owner's manual, because the same model can change sockets between trim levels and model years.
Do I need a CANbus decoder for a 9005 or 9006 LED upgrade?
If the vehicle monitors the headlamp circuit — most North American models built after about 2005 — a plain LED can trigger a bulb-out warning or flicker. Choose an error-free, decoder-equipped version; our CANbus guide explains how to test before you fit.
Can I use a 9005 LED bulb in fog lights?
Yes, where the fog lamp housing is specified for 9005 / HB3. Check the housing marking first: many fog lamps take H11, H8 or 9006 instead, and a high-beam bulb in a fog housing can glare. Match the socket and the beam role, not just the brightness.
Is HB3 the same as 9005?
Yes. HB3 is the trade name and 9005 is the US part number for the same P20d base, normally a 65 W high-beam or fog bulb. Boxes may print either code, sometimes both. It does not mean HB3 fits a 9006 socket — see the 9005 vs 9006 breakdown.
Is HB4 the same as 9006?
Yes. HB4 and 9006 both describe the P22d base, usually a 55 W low-beam or fog bulb. The two codes are aliases for one part. HB4 is not a high-beam version of HB3; the high-beam partner is 9005/HB3.
Are 9005, H11, H9 and H8 the same base?
No. 9005 is P20d; H11, H9 and H8 are PGJ19 variants with different keyways and wattages (55 W, 65 W and 35 W respectively). They look similar in photos and do not interchange. The H8/H9/H11 guide explains why H9 is sometimes used for more output.
Shop LED headlight bulbs by size
Wholesale buyers order by socket, not by series code. Pick a base to see the Chedina models listed for it, with specs and a quote path — and confirm the exact base before ordering.
Related reading
Short answers to the questions buyers ask us most.
