Short answer: H11, H8 and H9 share the same PGJ19 base family and look nearly identical, but they are not freely interchangeable. They differ in wattage and beam role: H11 (~55 W) is the all-rounder for low beam, fog and DRL; H9 (~65 W) is a brighter high beam with a shorter life; H8 (~35 W) sits between them, used mostly in fog and some low beams. The base keyways differ, so fitment must match the stamp on the old bulb. Chedina manufactures error-free LED versions across the family. See the H11 fitment page and the size chart.
At a Glance
| Socket | Base | Wattage | Typical use |
|---|---|---|---|
| H11 | PGJ19-2 | ~55 W | Low beam, fog, DRL (Toyota, Honda, Subaru, Ford) |
| H8 | PGJ19-1 | ~35 W | Fog lamps and some low beams (older applications) |
| H9 | PGJ19-5 | ~65 W | High beam (brighter, shorter lifespan) |
Why Wattage and Keyway Matter
All three use a PGJ19 push-in base, but the keyways are cut for different ratings: H11 is PGJ19-2, H8 is PGJ19-1, H9 is PGJ19-5. A higher-wattage bulb (H9) pushed into an H11 socket draws more current and runs hotter, shortening life and risking the connector; a lower-wattage bulb gives less light. Because the glass envelopes are so similar, the only reliable way to tell them apart is the code stamped on the base.
Do not fit an H9 into an H11 or H8 socket to get more light. The extra wattage overheats the socket and can melt the connector or trip CANbus. Match the exact code on the old bulb.
Upgrading to LED and CANbus
LED runs cooler and draws less current, which is exactly why some cars flag a bulb-out warning after an upgrade. For CANbus-monitored vehicles (most built after ~2005) choose an error-free, decoder-equipped LED. Our CANbus guide covers the fix, and our DOT vs ECE guide covers market paperwork. Browse the headlight range.
Can I use H9 instead of H11 for more brightness?
Not safely. H9 draws more wattage and overheats an H11 socket, risking the connector. If you want more light, use a properly rated LED built for the H11 socket — see the H11 page.
Are H8 and H11 the same?
No. They share the PGJ19 family but differ in keyway and wattage (H8 ~35 W, H11 ~55 W). They are not a safe swap. Confirm the code on the old bulb or the size chart.
Which does my car most likely use?
H11 is by far the most common on modern Toyota, Honda, Subaru and Ford for low beam, fog and DRL. H9 appears as high beam on some trucks and SUVs. Send us your model and we will confirm — see OEM/ODM.
Shop LED headlight bulbs by size
Wholesale buyers order by socket, not by series code. Pick a base to see the Chedina models listed for it, with specs and a quote path — and confirm the exact base before ordering.
Related reading
Short answers to the questions buyers ask us most.
